Slite 200W RGBW


The Slite 200 RGB is a compact gel documentation system that comes with several user-friendly features, such as easy operation and fast response when in WiFi environment and the standalone mode. This imaging system consists of a scientific CCD camera, motor driven lens, three emission filters at 535 nm, 595 nm, and 665 nm, and an RGB light illuminator. Gels after being stained with chemifluorescent dyes such as Cy2, Cy 3, Cy5, Alexa 488, Alexa 546, Alexa 647, SYPRO Ruby, SYBR Green I/II, SYBR Safe, Midori Green, and Eco dye, etc., can be excited by the blue, red, and green lights separately, providing easy viewing and image capturing by this system. Beside its unique three-color Colorfluor RGB illuminator, the Slite 200 RGB also works with standard UV transilluminators for typical applications with fluorescent dyes or ethidium bromide. The Slite 200 RGB is designed as a standalone workstation with a single all-in-one processor embedded inside the control board. Thus, it does not require any additional computer to operate. The Slite 200 RGB is equipped with a 8” built-in touch screen LCD panel that allows direct handling of  image data without any difficulty, Moreover, with the smart user’s interface and vivid icons the Slite 200 RGB can rapidly capture gel images with high accuracy.Using the Slite 200 RGB, will be a worry free and enjoyable experience in gel documentation, leaving you more time to focus on your research.

1. Wide applications for colorimetric fluorescence detection.
2. Patent-registered light source design: Effectively excite the dye on gel sample.
3. High sensitivity: detection limit may reach to 1 ng .
4. Highly efficient filter lens suitable for the emission wavelength excited from each lig ht source
5. Ready for DIGE, multiplex analysis*
6. Low energy consumption: Save the energy
7. Cost efficient: affordable imager system that may process some advanced research experiments.
 * Due that detection limits vary, some DIGE & multiplex experiments may need the imager with higher resolution for colorimetric signal observation. 



Three light sources equipped Slite 200RGB are red, green, and blue LED lights.  Thus, wide range of color fluorescence applications may be processed through light source excitations:

1.Red light applications:  Alexa™ 647, Alexa™ 660, allophycocyanin, cy5, TO-PRO™-3, etc….
2.Green light applications:  :  Alexa™ 546, Alexa™ 555, Alexa™ 568, cy3, Nile red, Rhodamine B, TRITC, etc….
3. Blue light applications: :  Alexa™ 488, cy2, SYBR Safe, SYBR Green, SYBR Gold, SYPRO Ruby, FITC, ethidium bromide, etc….

Note: Slite200RGB has higher sensitivity in RGB illumination than that in traditional UV transiliminator. Its image quality is the same as that scanned by a laser scanner.


I. Image Capturing Unit

Camera Set
CCD Sensor Sony CCD Sensor
Pixel Size (µm, VxH) 4.65 x 4.65
Dynamic Range 0 to 3.6 OD
Exposure Time
Up to 10 sec
Capture Resolution 2.0M; 1600x1200
A-D Converter 12 bit
Saving Bit Depth 8,16 bits/channel
Lens Set
Lens Type 6 X Zoom Lens
Lens Operation Motor-driven Lens
Focus Auto Focus
View Area
20 x 16 cm
Lens Mount C-mount

 II. Intelligent Darkroom

Filter Set
Filter Turret Motor-Driven, 6 position
Emission Filter 535nm, 595 nm, 665nm
Control Set
Display Panel Build-in 8” Touch TFT LCD
Standalone Control Touch Screen Interface
Image Storage USB Storage & WiFi
Lighting Set
Colorfluor 200 RGB 20 x 20cm. 470nm, 520nm, 630nm Led Light
White Back Light 21 x 26 cm Led Back Light
Epi White Light Led White Light
UV Transillumintor 20 x 20cm. 302nm UV Light (Optional)

 III. Packing

1D or 2D Analysis Totalab 1D (Optional)
Accessory Power Cord, User Manual, Warrany Card

 IV. General Info

 Power 100V-240V
Dimension (WxHxD) 300x500x400mm( 11.81 x 19.69 x 15.75 inch)
Weight 29K(64lb)

weekend football betting tips uk oddslot today expert football predictions uk