Pacific Image Electronics Co., Ltd

PowerFilm

PowerFilm


▪ 35mm Film Scanner
▪ Converts Negative/Positive Strips into Digital
▪ Up to 10 Film Strips, Maximum 60 Frames/Batch
▪ 24 MP image quality
▪ Support Mac/Windows

Automatic batch filmstrip scanning - You can walk away while it works. The max. number of frames per batch scan is 60 frames (10 film strips per batch each strip has a max. of 6 frames)

Makes scanning easy  & relaxing - The most convenient and easy to use 35mm batch film scanner. Simply load the films, set up the software with your particulars and select scan, now you are free to do other things instead of being tied to the computer

24 MP image quality comparable to high-end DSLR camera- With 24M resolution you can output a print size of 20.0 x 13.3 inches (50.8 x 33.9 cm) at 300 dpi

Compact Size - small desktop footprint, takes up half the space of a conversional flatbed scanner

Automatic dust and scratch removal with MagicTouch technology  - our own proprietary infrared cleaning technology, a great time saver in the post editing process

Better image quality than scanning photo prints - Photo prints are very low resolution, scanning them even with a high end photo scanner will still not provide you with a high quality digital image like scanning the original film will. Photo prints offer only about 260 dpi, whereas scanning a film allows you to capture close to 4000 dpi per inch with higher dynamic range using this film scanner

Fast and efficient, Saves time - High speed scanning: 24 sec./frame @ 6MP, fast scan speeds will make quick work of all those boxes and boxes of old negatives. Once digitized, you can share them countless times over with friends and family or even make print reproductions of old images that may have become lost or faded. Using the fast 6M setting, your digital output will have high enough quality to make 300 dpi prints at 10.0 x 6.7 inches (25.4 x 16.9 cm) in size.

 

 

Minimum System Requirements

PC
• Intel i5 2.53 GHz or higher
• Windows 7/8/10 32&64 bit
• 4 GB RAM (4 GB or more highly recommended)
• 30 GB of available hard disk space (additional space required for software installation and more required for image storage)
• High-speed USB 2.0 port

MAC
• Mac OS X 10.7 and higher, PowerPC NOT supported
• 4 GB RAM (4 GB or more highly recommended)
• 3.0 GB of available hard disk space (additional space required for software installation and more required for image storage)
• High-speed USB 2.0 port

 

Resolution 24M
Scan Speed Up to 24 sec/frame @ 6MP
(speed may vary depending on the system)
Data Capture 35 mm negative, positive, B/W film strip (2 to 6 frames per strip)
Scan Capacity   Up to 10 film strips per batch
Light Source White & IR LEDs
Sensor Linear RGB CCD
Advanced Features   MagicTouch and Multipass Xposure
Interface USB 2.0 
Power Supply Output: 12V DC / 1.25A
Dimensions 232mm(L) x 157mm(W) x 128mm (H) (9.13 x 6.18 x 5.04 inch)
Net Weight 1.9kg (4.19lb)
OS

Windows XP (SP2), VISTA, Windows 7/8/10

Mac OS 10.5 (minimum)

Hardware Requirements  

Windows

• Processor: Intel i5 2.53 GHz or higher
• RAM: 4 GB Minumum (2GB or more highly recommended)
• Hard Disk Free Space: 30 GB or more

 

Mac
• RAM: 4 GB RAM (4 GB or more highly recommended)
• Hard Disk Free Space: 30 GB or more

 

If there are any issues regarding the download, please refer to the following link: 

How to Download software from Scanace Website.pdf

 

Manual 

Troubleshooting 

Driver for Mac OS 10.7 or higher 

Driver for Windows 7/8/10/11 32 & 64 bit 

Firmware Update 

Product Inquiry